Task 1: Configure the hostnames on routers R1 and Sw1 as
illustrated in the topology.
Task 2: Configure VLAN 100 on Sw1 and name it DHCP_VLAN.
Assign port Fa0/2 and Fa0/3 to this VLAN. Enable the ports to automatically
transition to the Spanning Tree Forwarding state.
Task
3: Assuming the DHCP server is correctly configured, configure R1 F0/0 to
receive IP addressing via DHCP. Verify that R1 has received automatic
configuration information via DHCPDHCP Server Config:
Running Config of R1:
R1#show running-config
Building configuration...
Current configuration : 438 bytes
!
version 12.4
no service timestamps log datetime msec
no service timestamps debug datetime msec
no service password-encryption
!
hostname R1
!
interface FastEthernet0/0
ip address dhcp
duplex auto
speed auto
!
interface FastEthernet0/1
no ip address
duplex auto
speed auto
shutdown
!
interface Vlan1
no ip address
shutdown
!
ip classless
!
line con 0
line vty 0 4
login
!
end
Running Config of SW1:
sw1#show running-config
Building configuration...
Current configuration : 1735 bytes
!
version 12.2
no service timestamps log datetime msec
no service timestamps debug datetime msec
no service password-encryption
!
hostname sw1
!
interface FastEthernet0/1
switchport access
vlan 50
switchport mode
access
spanning-tree
portfast
!
interface FastEthernet0/2
switchport access
vlan 50
switchport mode
access
spanning-tree
portfast
!
interface FastEthernet0/3
switchport access
vlan 50
switchport mode
access
spanning-tree
portfast
!
interface FastEthernet0/4
spanning-tree
portfast
!
interface FastEthernet0/24
spanning-tree
portfast
!
interface Vlan1
no ip address
shutdown
!
line con 0
!
line vty 0 4
login
line vty 5 15
login
!
end
No comments:
Post a Comment